iMP-50 Firmware

New display while CD is loading is now displayed:

Recognize multi-session based CD's by activating the On / Off Feature within the General section of the Main Menu. When the multi-session is set to off, the player will read the first session of a multi-session based CD.

Two new User EQ's are added within the EQ section of the Main Menu. They are:

User EQ1
User EQ2
User EQ3

Creating a Password:

1. The new Password Function is located within the General section of the Main Menu.
2. The Player can be locked by entering 4 digits while using the Remote.
3. Move the cursor using Next/Back button and select a number using the Play/Navi button.

| OFF: Do not use PW function
| ON: Use PW function
| PASSWORD CHANGE

When the password is set to ON, the image below will be displayed:

To move the cursor: Use the Next (>>) or Back (<<) keys on your Remote. To select a number: Use the Play / Navi-Menu key.

   4. Enter password and the Player is ready to be used again. If incorrect password is entered, the Player will remain locked. If you have forgotten your password, please perform a Firmware upgrade (to the same version) and this will format the Player, and clear your current settings. You can then create a new password.

Changing Password:

1. To change your password, select "PASSWORD CHANGE" and enter the current password. The password is confirmed and the image below is displayed.
   
   
   
2. Input 4 numbers. If you don't remember your password, press STOP and exit. The password will not be changed.


If you input 4 numbers, the confirmation image is displayed.



3. Confirm the numbers and the new password is created and the Player can be used.

Please Note: You must enter the same numbers within the "Confirm" prompt. If the numbers are not confirmed, the Password will not be changed. If you exit on this step by pressing STOP or pressing any other keys before confirming the change, the password will not be changed.